Wil jij graag werken in een High Tech omgeving en onderdeel zijn van een internationaal team? Heb jij een achtergrond in Electrotechniek en ben jij klaar voor een stap in jouw carrière?
Dan zijn wij naar jou op zoek!
Jouw rol als ECAD Library Engineer
Als ECAD Library Engineer ben je onderdeel van het ECAD Services team van Sintecs. ECAD staat voor Electronic Computer-Aided Design en verwijst voornamelijk naar de software die door ontwerpers wordt gebruikt in de PCB-layout- of tekenafdelingen.
Het ECAD services team bestaat uit Nederlandse en Litouwse collega’s en houdt zich bezig met ECAD library management en de bijbehorende support. In de rol van ECAD Library engineer zijn wij op zoek naar iemand die overzicht kan houden en afwisselende activiteiten wil uitvoeren. Zo wordt verwacht dat jij, op basis van door de klant aangeleverde specificaties en functionele modellen gaat tekenen, maar ook een actieve rol speelt in het contact met de klanten. Bovendien ben je verantwoordelijk voor de oplevering van, door het team gemaakte, ECAD library parts bij de klant. Hierdoor ben jij een belangrijke schakel tussen de ECAD librarians en de klant.
Jouw rol zal onder andere bestaan uit de volgende taken en verantwoordelijkheden:
- Je bent het aanspreekpunt voor zowel de klant als het eigen team. Hierbij moet er ook af en toe op locatie van de klant gewerkt worden.
- Het tekenen van functionele modellen op basis van specificaties die worden aangeleverd door de klant.
- Het opleveren van door het team gemaakte library parts bij de klant.
- Je kunt goed probleemoplossend werken.
Omdat deze rol als ECAD Library Engineer specialistische kennis betreft, begrijpen we dat je niet direct over alle kennis en vaardigheden beschikt om een goede invulling aan de genoemde taken te geven. Uiteraard zullen wij de juiste begeleiding bieden, zodat jij je deze rol snel eigen maakt. Hiervoor verwachten wij uiteraard wel de juiste motivatie en inzet. Het is een mooie kans om in een groeiende organisatie aan jouw eigen carrière te werken.
In de eerste periode wordt er van je verwacht dat je enkele dagen op ons kantoor in Hengelo (Ov) aanwezig bent, omdat dit het inwerken bevordert. Later zal je in overleg met de Team Lead bepalen waar je het best kunt werken. Dit kan een combinatie zijn van werken op ons kantoor in Hengelo, werken vanuit huis, of werken bij een grote klant van Sintecs, gevestigd in de regio Eindhoven.
Wat wij vragen:
- Een afgeronde opleiding MBO+ of HBO in de richting Elektrotechniek, of soortgelijk.
- Je bent communicatief vaardig en kunt goed samenwerken.
- Je bent in het bezit van een rijbewijs, omdat er van je wordt gevraagd om af en toe op locatie bij een grote klant in het Zuiden van Nederland te werken.
- Je hebt enkele jaren werkervaring in soortgelijke werkomgeving. Ervaring in alle taken is niet vereist.
- Je beheerst de Engelse taal in woord en geschrift.
Over Sintecs
Sintecs staat voor Signal Integrity Consultancy Services. Deze expertise is onze drive voor engineeringsprojecten. Sintecs is een innovatieve en dynamische organisatie, bestaande uit een team van consultants en engineers, die gespecialiseerd zijn in het ontwerpen van complexe elektronisch designs.
Al 22 jaar groeit ons team van enthousiaste medewerkers in de unieke niche-industrie van high-speed elektronica in Signal en Power Integrity, maar ook onze andere teams als ECAD library services, PCB Layout en Hardware en Software Engineering.
Altijd opererend op de grenzen van wat technisch haalbaar is noemen wij “Designing on the edge”. Hierdoor bieden we toonaangevende time-to-market voor hoogwaardige, hightech producten.
Sintecs is trots op zijn producten en diensten, zoals de TrustBox, die op de CES 2019 in Las Vegas werd bekroond met de Best of Innovation Award.
Onze huidige kantoren zijn gevestigd in Nederland (Hengelo) en Vilnius (Litouwen) en we verwachten in de toekomst verder te groeien. Op dit moment heeft Sintecs ruim 75 getalenteerde medewerkers in dienst.
Wat bieden wij:
Werken bij Sintecs betekent een leuke werkomgeving en enthousiaste collega’s. Daarnaast kun je het volgende verwachten:
Heb jij sterke affiniteit met hardware en softwareontwikkeling? Wil jij bij een internationale organisatie werken en deel uitmaken van de techniek van de toekomst?
Dan zijn wij naar jou op zoek!
Jouw rol als FPGA Engineer
Als FPGA Engineer bij Sintecs ben je onderdeel van het engineering team dat bestaat uit 14 software en 12 hardware engineers. Samen met je collega’s werk jij als FPGA-expert aan elektronica oplossingen, die wij voor en in overleg met onze klanten ontwikkelen en produceren. In deze rol is het dus mogelijk dat je klanten bezoekt voor technische besprekingen. Daarnaast communiceer je over de technische voortgang met Project Manager.
Je taken bestaan onder andere uit:
- Je bent verantwoordelijk voor het FPGA-design binnen projecten. Dit houdt het volgende in: ontwerp-, simulatie-, implementatie en verificatie van FPGA Designs en IP-blokken.
- Deelname aan projectteams: interne/externe systeemarchitecten, Hardware en Software Engineers.
- Het opstellen van conceptoplossingen en het begroten van werkzaamheden t.b.v. offertes
- Het opstellen van specificaties en deze doornemen met de klant.
- Zelfstandig ontwerpen, implementeren, testen en documenteren van een ontwerp.
- Toegang hebben tot de meest recente kennis op het eigen vakgebied; FPGA/VHDL en deze waar nodig verder actualiseren.
- Op de hoogte zijn en blijven van ontwikkeltools en -praktijken.
- Werken met en volgens (interne) coderingsstandaarden.
- Eventueel aansturen en begeleiden van junior FPGA-ontwerpers.
Wat wij vragen:
- Een voltooide HBO of WO studie bij voorkeur in de richting Elektrotechniek of Embedded Systems.
- Je hebt 3-5 jaar ervaring als ontwerper van FPGA’s of IC’s.
- Je bent nauwkeurig en hebt een pro-actieve houding.
- Je hebt kennis van en ervaring met modelling samples (bv. VHDL, Verilog, RTL).
- Je hebt kennis van ontwikkeltools (bv. Vivado, Quartus, Modelsim, Questasim, Mentor CDC)
- Je bent bekend met Intel, Xilinx of MicroSemi.
- Je beheerst de Nederlandse en Engelse taal in woord en geschrift.
- Het is een pre als je bekend bent met programmeertalen zoals C/C++/#, Java en Python.
- Het is en pre als je bekend bent met Verificatie (SV/SVA).
- Het is een pre als je bekend bent met hardware ontwikkeling en PCB-design.
Over Sintecs
Sintecs staat voor Signal Integrity Consultancy Services. Deze expertise is onze drive voor engineeringsprojecten. Sintecs is een innovatieve en dynamische organisatie, bestaande uit een team van consultants en engineers, die gespecialiseerd zijn in het ontwerpen van complexe elektronisch designs.
Al 22 jaar groeit ons team van enthousiaste medewerkers in de unieke niche-industrie van high-speed elektronica in Signal en Power Integrity, maar ook onze andere teams als ECAD library services, PCB Layout en Hardware en Software Engineering.
Altijd opererend op de grenzen van wat technisch haalbaar is noemen wij “Designing on the edge”. Hierdoor bieden we toonaangevende time-to-market voor hoogwaardige, hightech producten.
Sintecs is trots op zijn producten en diensten, zoals de TrustBox, die op de CES 2019 in Las Vegas werd bekroond met de Best of Innovation Award.
Onze huidige kantoren zijn gevestigd in Nederland (Hengelo) en Vilnius (Litouwen) en we verwachten in de toekomst verder te groeien. Op dit moment heeft Sintecs ruim 65 getalenteerde medewerkers in dienst.
Wat bieden wij:
Werken bij Sintecs betekent een leuke werkomgeving en enthousiaste collega’s. Daarnaast kun je het volgende verwachten:
Do you have strong interest in high-speed electronics design? Do you want to learn and know everything about simulation and analysis? Do you want to be part of a young and international team of specialists who use their qualities to help customers to optimize their designs?
Then we are looking for you!
Your role as a Signal & Power Integrity Engineer
As Signal & Power Integrity Engineer you are part of the analysis team that consists of six engineers. Together with your colleagues you ensure that Sintecs remains at the top of high-speed design and strengthens its leading role internationally.
In this position you will deepen your knowledge of everything that is related to electrical signal processing and its preservation when a PCB is used for signal transport. In collaboration with colleagues from the analysis team, you will ensure that each design is thoroughly analyzed in the SI, PI, crosstalk and timing areas, by using IBIS, timing models and S-parameter models. Over time, you will become more familiar with the basics of SI/PI and timing, complex PCB technology and high-speed interfaces. Especially in the beginning you will be asked for your motivation and commitment to become more familiar about this new field. For this you will be given time and guidance during the introduction period.
In the role of Signal and Power Integrity Engineer, you will be the person who figures out why a customer’s prototype doesn’t work, or how to make a design meet the SI/PI requirements. You will regularly interact with customers to find the best possible technical solution. As SI/PI engineer you will also regularly assist your colleagues from the Hardware and/or PCB Layout Team to take SI/PI effects into account during the design phase. By performing the analyses during the design phase, you prevent changes afterwards which safes a lot of time. The job is diverse and gives you the feeling that you have actively contributed to the design. In time you will use your expertise not only to help our clients create the best possible design, but also to implement changes in our working methods.
To do your job well, it is important that you keep track of electronics trends, especially the developments in the field of high-speed design. Furthermore, you have good analytical skills and are interested in simulation models for e.g. Signal Integrity (SI), Power Integrity (PI) and timing analyses and you want to use the models to test the quality of a design. Finally, you would like to be aware of important functional requirements for high-speed designs for which you have learned the ins and outs of concept choices you might make in the design process.
What do you bring
- A completed Bachelor or Master’s degree. Preferably in electrical engineering or applied physics.
- Several years of work experience as a Hardware Engineer, or PCB Layout Engineer.
- Interest in simulation techniques, PCB layout, high-speed design and innovation.
- You are eager to learn, analytical and communicative.
- You have a good command of the English language orally and in writing. It is an advantage if you also master the Dutch language.
- Knowledge of IBIS models, as well as high-speed interfaces, such as DDRx, USB, PCIe is an advantage.
About Sintecs
We at Sintecs, short for Signal Integrity Consultancy Services, are an innovative and dynamic team of consultants and engineers that offer complex electronic design services.
For 22 years our team of enthusiastic employees have been growing in the unique niche industry of high-speed electronics in Signal and Power Integrity as well as PCB Layout, Embedded Software and Hardware Engineering. Always operating on the limits of what is technically feasible we are: “Designing on the edge”. Doing this we offer industry leading time-to-market for high-quality, high-tech products.
Sintecs takes pride in its products and services such as our TrustBox, which got crowned with the Best of Innovation Award at CES 2019.
Our current offices are located in the Netherlands (Hengelo) and Vilnius (Lithuania), and we expect to grow further in the future. At this moment Sintecs employs in total about 65 people.
We offer
Working at Sintecs means a nice working environment and enthusiastic colleagues. In addition, you can expect the following:
Your role as ECAD Support Engineer
Do you want to work in a High-Tech environment? Do you want to work on the design flows that are used to create the technology that will be shaping the future? Do you want to be part of an international team?
Then we are looking for you.
About the vacancy
The vacancy assumes the presence of a small specialized experience. At the same time, it requires understanding the fundamentals of electronics and implies the ability to understand texts in English without the use of third-party tools. Our company provides the opportunity to study in the required amount at the place of work during the trial period.
- Development of library components, templates and related documentation for ECAD systems (electronic circuits, printed circuit boards).
- Studying and analysis of the technical requirements from Customers, fulfilment these requirements during development of components.
- Work in close cooperation with Customers.
Skill requirements
- Higher or secondary special education in the field of radio engineering, electronics, design of electronic equipment.
- Understanding the basics of electronics.
- Good general skills of using a computer.
- Fluency in English enough for selective reading datasheets describing components and searching for the required information.
Nice to have
- Knowing any ECAD systems on any level will be beneficial.
- Skills of verbal or written will be appreciated as an advantage.
Conditions
- Probation period 3 months.
- Full time work in at the comfortable office in Vilnius.
About Sintecs
We at Sintecs, short for Signal Integrity Consultancy Services, are an innovative and dynamic team of consultants and engineers that offer complex electronic design services.
For 22 years our team of enthusiastic employees have been growing in the unique niche industry of high-speed electronics in Signal and Power Integrity as well as PCB Layout, Embedded Software and Hardware Engineering. Always operating on the limits of what is technically feasible we are: “Designing on the edge”. Doing this we offer industry-leading time-to-market for high-quality, high-tech products.
Sintecs takes pride in its products and services such as our TrustBox, which got crowned with the Best of Innovation Award at CES 2019.
Our current offices are located in the Netherlands (Hengelo) and Lithuania (Vilnius), and we expect to grow further in the future. At this moment Sintecs employs in total about 70 people.
We offer
Working at Sintecs means a nice working environment and enthusiastic colleagues. In addition, you can expect the following:
Your role as ECAD Support Engineer
Do you want to work in a High-Tech environment? Do you want to work on the design flows that are used to create the technology that will be shaping the future? Do you want to be part of an international team?
Then we are looking for you.
What are we looking for?
It will be your job to support our Customers and internal ECAD teams in their design environment. Specifically, you will have the following responsibilities:
- Supporting continuous data exchange between the Customers and the offices of Sintecs.
- Implementing the tools on a complex IT infrastructure, to embed them in the organization and to connect it to other systems. This could involve writing an additional tool and / or interface.
- Improving the processes on how things are done; optimizing the electronic design flow and connect it to the other processes in the company.
- Supporting, enhancing, and developing integrations with PDM/PLM toolsets and workflows.
- Developing custom workflows and processing automations.
- Developing automations using different scripting languages.
- You will be responsible for the maintenance and support of Siemens EDA/Mentor Graphics Xpedition Enterprise Tool Suite of applications.
The job is a mix between electronics and computer science. Understanding both worlds is therefore an advantage.
What do you bring?
- A completed University education in Electronics, ICT or Computer Science.
- Relevant experience and knowledge of software developments as well as library methodology, tools, and design flow are great advantages, but not a requirement.
- Programming skills, scripting or otherwise are a big advantage.
- You are a team player, able to communicate effectively with different types of people, able to glue the team together.
- You have a practical and customer-oriented mindset.
- Excellent communication skills in English. Knowing Russian would be beneficial.
- You have excellent problem-solving and analytical skills and take full ownership.
- Citizenship of the EU country is a must.
About Sintecs
We at Sintecs, short for Signal Integrity Consultancy Services, are an innovative and dynamic team of consultants and engineers that offer complex electronic design services.
For 20 years our team of enthusiastic employees have been growing in the unique niche industry of high-speed electronics in Signal and Power Integrity as well as PCB Layout, Embedded Software and Hardware Engineering. Always operating on the limits of what is technically feasible we are: “Designing on the edge”. Doing this we offer industry-leading time-to-market for high-quality, high-tech products.
Sintecs takes pride in its products and services such as our TrustBox, which got crowned with the Best of Innovation Award at CES 2019.
Our current offices are located in the Netherlands (Hengelo) and Lithuania (Vilnius), and we expect to grow further in the future. At this moment Sintecs employs in total about 70 people.
We offer
Working at Sintecs means a nice working environment and enthusiastic colleagues. In addition, you can expect the following:
Your role as Senior Electronics Engineer
Would you like to work on innovative and challenging high-speed electronic design projects? Would you like to work inside an interdisciplinary and multinational team where you can further develop yourself and be the lead engineer within a group of enthusiastic design engineers?
What are we looking for?
In the role of junior or mid-level electronics engineering, you are responsible for creating schematic captures and preparing the accompanying technical documentation. You will be thinking along with the design of complex (digital) boards with development partners. You will coordinate other steps in the design process and communicate with software and layout, signal integrity, and power integrity team members to obtain the desired result for the products. The selection of components is one of your responsibilities together with your senior peers. You will also support our sales team in providing hour estimations in the quote process when needed.
What do you bring?
- A completed university degree in Electrical Engineering, Embedded Systems or similar
- At least 1 year of experience as a Hardware / Electronics Engineer
- Experience with schematic capture, documentation writing, and testing for electronic products
- Good communication skills.
- Experience with Mentor Graphics and/or Altium design environment is an advantage
- Fluent in English and at least basic Russian. We are open to help you develop yourself by following a course to develop your language skills
About Sintecs
We at Sintecs, short for Signal Integrity Consultancy Services, are an innovative and dynamic team of consultants and engineers that offer complex electronic design services. For 20 years our team of enthusiastic employees have been growing in the unique niche industry of high-speed electronics in Signal and Power Integrity as well as PCB Layout, Embedded Software and Hardware Engineering. Always operating on the limits of what is technically feasible we are: “Designing on the edge”. Doing this we offer industry-leading time-to-market for high-quality, high-tech products.
Sintecs takes pride in its products and services such as our TrustBox, which got crowned with the Best of Innovation Award at CES 2019.
Our current offices are located in the Netherlands (Hengelo) and Vilnius (Lithuania), and we expect to grow further in the future. At this moment Sintecs employs in total about 70 people.
We offer
Working at Sintecs means a nice working environment and enthusiastic colleagues. In addition, you can expect the following:
Your role as an Embedded Software Engineer
Do you want to work in a High-Tech environment? Is it your ambition to work on innovative and challenging projects? Do you want to work closely with colleagues from other disciplines and customers in a multidisciplinary team? Then we are looking for you.
What are we looking for?
As an Embedded Software Engineer, you use your knowledge to realize complex engineering projects. You know how to develop software in a structured way and work together in a team of 12 software and hardware engineers. You can communicate clearly about project progress and possible project obstacles. You can work independently and can look at problems from different angles to arrive at the right solution. You will be assisting with Board bring-up and validation of functionality, building test software, and working with various systems varying from ‘simple’ microcontroller systems to high-end, multicore SOC systems with 100G+ networking. Next to that, you can work on implementing Bootloader configuration and adjusting it and developing Linux configuration and drivers.
What do you bring?
- A completed Higher Vocational or University education in (Technical) Computer Science is preferred.
- You have excellent C skills
- You have at least 3 years of relevant experience
- Experience in C++/Python/TCL is an advantage
- You have a practical and customer-oriented mindset
- You have experience with reading schematics, or you are willing to learn this
- You can handle measuring instruments like an Oscilloscope and Logic analyzer
- You are fluent in English. Russian can be a very useful addition
About Sintecs
We at Sintecs, short for Signal Integrity Consultancy Services, are an innovative and dynamic team of consultants and engineers that offer complex electronic design services.
For 20 years our team of enthusiastic employees have been growing in the unique niche industry of high-speed electronics in Signal and Power Integrity as well as PCB Layout, Embedded Software and Hardware Engineering. Always operating on the limits of what is technically feasible we are: “Designing on the edge”. Doing this we offer industry leading time-to-market for high-quality, high-tech products.
Sintecs takes pride in its products and services such as our TrustBox, which got crowned with the Best of Innovation Award at CES 2019.
Our current offices are located in the Netherlands (Hengelo) and Vilnius (Lithuania), and we expect to grow further in the future. At this moment Sintecs employs in total about 60 people.
We offer
Working at Sintecs means a nice working environment and enthusiastic colleagues. In addition, you can expect the following:
Your role as Project Coordinator
Do you want to manage projects in a technical environment? As a Project Coordinator, you will work on various internal projects and for our customers across Europe. You have a firm grip on the scope, the budget, and the timelines, and you communicate clearly both with the team and the customer. You coordinate all steps in the project, from idea to realization. You will inform management about the status of the projects regularly.
What are we looking for?
In this role, it is important that you can easily switch between the different activities of your team members from electronics hardware, embedded software, mechanics to production implementation. You have a lot of responsibility, which makes the position challenging but also very interesting.
What do you bring?
- A completed technical higher vocational or university education
- At least 1-2 years of relevant experience in a similar position
- Analytically strong and able to think out of the box
- Excellent communication skills in English, good Russian
- You are proactive, flexible and goal-oriented
- You communicate consciously and manage expectations well
About Sintecs
Signal Integrity Consultancy Services, in short Sintecs, offers a faster time-to-market for high-quality products: complex electronic design and services on the edge of what is technically feasible: ‘’Designing on the edge.’’ For 20 years, we have been growing in this unique niche of the high-speed electronics industry in Signal and Power Integrity, PCB Layout, Embedded Software, and Hardware Engineering. We are now known as a leading innovative company with award-winning products such as TrustBox – Best of Innovation Award at CES 2019, DDR4 interface, 100 Gigabit Ethernet design, and Cyber Secure Products.
We offer
Working at Sintecs means a nice working environment and an enthusiastic international team of colleagues. In addition, you can expect the following: